511 The specified COM port handle is not for CHAR stream
512 Cannot get COM port state
513 Cannot get COM port time out
514 Cannot set COM port time out
515 Cannot close COM port.
516 The specified address is blocked from being dialed on the specified call
517 The line cannot be opened due to a persistent condition, such as that of a serial port being exclusively opened by another process
518 The specified device identifier or line device identifier is invalid or out of range
519 All call appearances on the specified address are currently in use
520 The dialable address parameter contains dialing control characters that are not processed by the service provider
521 The dialable address parameter contains dialing control characters that are not processed by the service provider
522 The dialable address parameter contains dialing control characters that are not processed by the service provider
523 The dialable address parameter contains dialing control characters that are not processed by the service provider
524 The application requested an API version or version range that is either incompatible or cannot be supported by the Telephony API implementation and/or corresponding service provider
525 The application requested an extension version range that is either invalid or cannot be supported by the corresponding service provider
526 The telephon.ini file cannot be read or understood properly by TAPI
527 The line device is in use
528 A specified address is either invalid or not allowed
529 The specified address identifier is either invalid or out of range
530 The specified address mode is invalid
531 The application handle or the appliction registration handle is invalid
532 The specified application name is invalid
533 The specified call handle is not valid
534 The specified call parameters are invalid
535 The current state of a call is not in a valid state for the requested operation
536 The specified country code is invalid
537 The specified line does not support the indicated device class
538 The specified call, device, line device, or line handle is invalid
539 Invalid line state
540 The specified media mode parameter is invalid
541 Invalid parameter
542 Invalid pointer
543 An invalid flag or combination of flags was set for the dwPrivileges parameter
544 One or more rates, such as specified in the LINECALLPARAMS structure, are invalid
545 The specified device identifier, has been removed from the system since TAPI was last initialized
546 Either tapiaddr.dll could not be located or the telephone service provider for the specified device found that one of its components is missing or corrupt
547 Insufficient memory to perform the operation, or unable to lock memory
548 The application does not have owner privilege to the specified call
549 The application is not registered as a request recipient for the indicated request mode
550 There is no modem connected to the specified COM port.
551 The operation is not available for the given device or specified line
552 The service provider currently does not have enough bandwidth available for the selected baud rate.
553 TAPI reinitialization has been requested
554 Insufficient resources to complete the operation
555 The structure size is too small
556 TAPI is not yet initialized
557 The modem is already in use.
558 The phone call is idle (no call exists)
559 The destination phone can not be reached
560 The destination phone is disconnected
561 The destination phone status is unknown
562 An application is aleady initializing TAPI
563 The phone line does not support DATA MODEM call
564 The phone line does not support MAKE CALL operation
565 The application aborted waiting for server answer. The server may be down. Please try again at a later time.
566 The server did not answer phone in time. Please check the SMS Provider's phone number from the Tools -> Options menu.
567 The phone line is already in use.
568 Unable to connect to the server. Please check that you have the correct SMS number under Tools -> Options -> Service Provider Settings.
569 Unable to send the message. The server may be busy or unavailable. Please try again later. If the problem persists, contact your service provider.
570 Unable to send the message. Check to see that the message does not contain any invalid characters. Valid characters are numerals 0-9, and letters A-Z, and most punctuation symbols.
571 The message was sent successfully, however the system was unable to properly disconnect from the server.
572 An unknown error has occured, please contact technical support.
573 Can not open SMS registry key. Please try restarting CompanionPro
574 Can not set registry value for Device ID
575 Can not get registry value for Device ID
576 Can not close registry
577 There is not enough memory. Please close other applications and retry the operation.
578 Can not close carrier file
579 The message entered is empty.
580 The specified message is too long. The valid range is from 1 to 2048 characters.
581 The specified carrier phone number is invalid.
582 The specified carrier maximum message length is invalid. The valid range is 140-250.
583 There has been a change made to the modem configuration. In order for the changes to take effect within CompanionPro, please exit and restart CompanionPro.
584 Line selected is now Out of Service
585 Line selected is now disconnected
586 Line selected is now out for maintenance
587 Warning
588 -1
589 SOFTWARE\Motorola\iDEN\SMS
590 Device ID
591 Line Unnamed
592 Line Name is Empty
593 From
594 There is no response code returned from the server.
595 The server TAP specification is supported.
596 The server is processing the previous input -- please wait and try again.
597 The maximum pages have been entered for this session.
598 The maximum time reached for this session.
599 The new session has started normally.
600 This session has terminated normally.
601 The message has been sent successfully.
602 The specified message was too long. It was truncated and sent.
603 The message is accepted by the server, but held of deferred delivery.
604 The message has been truncated and sent.
605 A 'time-out' occurred. The server is waiting for user input.
606 Unexpected characters received before the start of a transaction.
607 Excessive attempts to send/re-send a trnasaction with checksum errors.
608 The message contained characters, but message characters are not allowed for the destination phone format. Perhaps the phone for the given PIN is a 'Tone Only' pager.
609 The message contained alphabetic characters, but alphabetic characters are not allowed for the destination phone format. It is possible the phone for the given PIN number is a 'numeric' pager.
610 Excessive invalid messages received by the server.
611 Invalid logon attempt: incorrectly formed login sequence.
612 Invalid logon attempt: the given service type and category are not supported.
621 The message you entered is too long. Please try sending a shorter message.
622 Initializing TAPI.
623 Obtaining a phone line.
624 Calling the service provider.
625 Hanging up...
626 Performing handshake with service provider.
627 Sending message to the phone:
628 Opening the COM port.
629 Closing the COM port.
630 Connecting to the service provider.
631 Disconnecting from the service provider.
632 CallList Language
1174 Display about using the application help\nUsing help
1175 Click to launch recover wizard\nRecover Wizard
1176 Click to launch help \nHelp
1177 Click to add a new talkgroup\nAdd Talkgroup
1178 Click to delete a talkgroup\nTalkgroup
1179 Click to reset phone\nReset Phone
1180 Click to change language to English\nEnglish
1181 Click to change language to French\nFrench
1182 Click to launch Phone Center\nPhone Center
1183 Click to launch Message Center\nMessage Center
1184 Click to read the phone\nRead Phone
1185 Click to program the data into the phone\nProgram Phone
1186 Click to append a file\nAppend a file
1187 Click to recover the phone\nRecover Wizard
1188 Click to launch options dialog\nOptions
1189 Click to launch Copy Wizard\nCopy Wizard
1190 Click to add a unit\nAdd Unit
1191 Click to delete unit\nDelete Unit
1192 List Help topics\nHelp Topics
1314 Click to delete a talkgroup\nDelete Talkgroup
1315 Click to view phone list\nPhone list
1316 Click to view private list\nPrivate list
1317 Click to view phone settings\nPhone settings
1318 Click to view talkgroup scan list\nTalkgroup Scan list
1319 Click to view status message list\nStatus Message list
1320 Click to view phone details\nView phone details.
1321 Click to enter a note.\nNotes.
1322 Click to load a message\nLoad Message
1323 Click to save message\nSave Message
1324 Click to set the modem details\nModem Details.
1325 Click to set the message settings\nMessage settings.
1326 Click to see the help\nHelp
1327 Click to view talkgroup list\nTalkgroup Call list
1328 Show or hide the application toolbar\nToggle application toolbar
1329 Show or hide the iDEN toolbar\nToggle iDEN toolbar
1330 Click to view phonebook.\nPhonebook
1331 Click to launch the Personal Info Center.\nPersonal Info Center
1332 Click to synchronize simple lists and phonebook.\n Intra Sync
1333 Click to launch Phone Center\nPhone Center
1334 Click to synchronize.\nTrueSync
1335 Click to change language to Hebrew\nHebrew
1336 Create a new document\nNew
1337 Click to autofill all units\nAutofill all
1338 Arrow Header
1339 The file cannot be opend
1340 The specified ID is invalid
1341 The specified size is invalid
1342 The specified pointer is invalid (null pointer).
1343 Cannot allocate memory. You may free up some memory by closing some other applications.
1344 Unable to read data from phone. Please make sure the communication settings are correct from the Tools -> Options menu and that your phone is powered on and is securely connected to the cable which is plugged into the COM port on your system.\nFor USB Users, please disconnect and reconnect the phone from the cable.
1345 Unable to read data from phone. Please make sure the communication settings are correct from the Tools -> Options menu and that your phone is powered on and is securely connected to the cable which is plugged into the COM port on your system.\nFor USB Users, please disconnect and reconnect the phone from the cable.
1346 The specified COM port is invalid. Valid COM ports are usually COM1 through COM4.
1347 The phone models mismatch
1348 The read operation is aborted
1349 Cannot write to the file
1350 Cannot read file
1351 There is no codeplug currently in memory
1352 Please be aware that call list entries have been skipped.
1353 This codeplug version is not supported.
1354 The codeplug version does not match.
1355 The codeplug checksum is incorrect. The codeplug may be corrupt.
1356 Cannot access codeplug. Please check to make sure the cable is securely connected to the iDEN unit and plugged in to the COM port on the computer.\nFor USB Users, please disconnect and reconnect the phone from the cable.
1357 The phone model is not supported
1358 The specified port ID is invalid
1359 The serial connection is bad. Please check to make sure the cable is securely connected to the iDEN unit and plugged in to the COM port on the computer.
1360 Error updating codeplug Structure
1361 Error updating codeplug defaults
1362 Error updating codeplug structure and defaults
1363 Unable to access the iDEN phone. Please make sure the COM port settings has been set correctly from the Tools -> Options dialog and that the phone is on and is securely connected to the cable.\nFor USB Users, please disconnect and reconnect the phone from the cable.
1364 There has been an initialization error. Please try restarting CompanionPro. If the problem persists, contact technical support.
1365 An unknown internal error has occurred. Try restarting CompanionPro. Please contact technical support if the error persists.
1366 The phone has been read successfully.
1367 An unknown error has occurred. Please contact technical support if the error persists.
1368 The serial communication test was successful.
1369 IP Address
1370 Fax
1371 %1 Online
1372 Private
1373 Phone
1374 Model Type
1375 Serial Number
1376 IMEI/SIM ID
1378 User Name
1379 Rec number
1380 The message you've entered is longer than the Maximum SMS Length your Service Provider Supports. If you continue with this operation, your message will be truncated. You may chose to select the Auto Split checkbox, along with other settings to avoid trucation of your message. \n\nWould you like to modify these settings now?
1381 Your service provider supports Multiple NAMs. This option cannot be unchecked.
1382 The selected NAM is invalid. The valid range is from 1 to 3.
1383 Options
1384 The specified maximum messsge length is invalid. The valid range is 140 - 250.
1385 New CompanionPro File
1386 %1 cannot be created. Make sure the disk is not write protected, or that you are not trying to write to read only media (Such as a CDROM)
1387 Could not load grid file.
1388 Are you sure you want to remove this message permanently?
1389 Please select a valid modem for SMS messaging. You may select a modem by clicking on the modem icon on the SMS toolbar located on the right side of the application window.
1390 The message was sent successfully.
1391 The message has been saved.
1392 The selected message is invalid.
1393 OLE initialization failed. Make sure that the OLE libraries are the correct version.
1394 You cannot specify more than 100 PIN numbers. Only the first 100 PIN numbers will be selected, do you want to continue or re-select?
1395 Unable to send the SMS message to: %1. Please make sure a valid modem is selected. To select a different modem, click on the modem icon on the SMS Actions toolbar. Also, make sure the service provider phone number is set correctly in "SMS Settings"
1396 AUTO BAUD
1397 Would you like to append the new phone information into the current file? Choosing "No" will append the new phone information into a new COP file.
1398 Phone List
1399 Private Call List : NAM1
1400 Private Call List : NAM2
1401 Private Call List : NAM3
1402 Phone Settings : Basic
1403 Phone Settings : Advanced
1404 Talkgroup Mode : NAM1
1405 The phone has been reset.
1406 Status ID
1407 Append CompanionPro File.
1408 This may overwrite existing entries in the list. Process anyway?
1409 The target file already contains the information for the unit with IMEI/SIM ID <%1>.Would you like to replace the existing unit information?
1410 Field Range
1411 Minimum length attribute
1412 Please enter at least %1 characters.\n
1413 Please enter a value consisting of only the following characters: %1
1414 Specifiy the language support
1415 Is Alias
1416 Range Edit Box
1417 Scaled Number Edit Box\n
1418 Decimal Edit Box\n
1419 Please enter an integer value in the range %1 .\n
1420 Field Data Type\n
1421 Make Shift Microsoft Outlook Bar(tm)\nOutlook Bar(tm)
1422 Would you like to retry the operation?
1423 The Write Phone operation has failed.\n\nIMPORTANT !!!\nIf the phone does not power up properly or shows an error code after a failed Write Phone operation, the codeplug has probably been corrupted. A backup codeplug file named Backup.dbf has been saved in the CompanionPro program folder. Before attempting the Write Phone operation again, rename this file and make a note of it's location.\n\nTo fix a corrupted phone, open the backup file in CompanionPro, and choose the Write Phone operation to restore the codeplug.
1424 The operation was successful.
1425 OLE initialization failed. Make sure that the OLE libraries are the correct version.
1426 Not able to get the model types from model table.
1427 Not able to get the Line1 ring style.
1482 Not able to get the Line2 ring style.
1483 Cross fleet functionality is not supported by this phone.
1484 The cross fleet selection in the COP file is not selected, but your phone is cross fleet capable. Please re-enter the phone information with the cross fleet option checked.
1485 Not able to set user name.
1486 Error while writing the data to file. Please make sure there is sufficient disk space.
1487 Error while flushing the temporary table. Please make sure there is sufficient disk space.
1488 You have canceled the operation. The information read from the iDEN phone will not be saved.
1489 Please select the file.
1490 The serial number cannot be less than 10 characters. Please enter the complete serial number.
1491 Unable to load the "units grid" component of CompanionPro. Try restarting CompanionPro. If the problem persists, contact technical support.
1492 The user name field cannot be left empty. Please enter a username in the field in order to continue.
1493 The IMEI number you've entered is less than 15 characters. Please enter all 15 characters of the IMEI/SIM ID.
1494 The selected file is invalid or corrupted and can not be opened.
1495 The selected file does not contain any unit information. Please select a valid file to continue.
1496 You must first select a source IMEI/SIM ID in order to proceed with the Copy Wizard. Please select an IMEI/SIM ID and try again.
1497 An error occurred while reading information from the file. The file may be corrupt. Please close any other applications, restart CompanionPro, and retry the operation.
1498 A data error has occurred. Try restarting CompanionPro to resolve the problem.
1499 The private ID entered already exists in this talkgroup. Please enter a new unique private ID.
1500 Duplicate talkgroup ID's have been found. The append operation has been cancelled.
1501 An error has occurred in the application. Please try closing CompanionPro and restarting.
1502 Unable to open the system's registry.
1503 The phone has been successfully programmed.
1504 The phone has been copied successfully.
1505 The phone has been recovered successfully.
1506 The backup codeplug path entered is invalid or does not exist. Please enter a valid codeplug backup path.
1507 Unable to write to the backup file. Please ensure the codeplug backup file path is correct in the Tools -> Options menu. No backup file has been written.
1508 The backup file could not be found. A backup file for your phone may not exist or the path may be incorrect. Please check to see if a backup file exists and the codeplug backup path from the Tools -> Options menu is set correctly.
1509 Unable to retrieve the IMEI/SIM ID.
1510 Cannot create backup codeplug file, the specified backup path may be invalid. Please check it from Options.
1511 Invalid ID
1512 Bad Size
1513 Null Pointer found. Please try restarting CompanionPro and closing all other applicatoins. Contact support if the problem persists.
1514 Memory allocation error. Try freeing up some memory by closing other applications.
1515 Unable to read phone. Please check to make sure the COM port setting is set correctly from the Tools -> Options menu. Also, be sure the cable is securely connected to the iDEN unit, and plugged into the COM port on the computer.\nFor USB Users, please disconnect and reconnect the phone from the cable.
1516 Unable to write to the phone. Please check to make sure the cable is securely connected to the iDEN unit and plugged in to the COM port on the computer.\nFor USB Users, please disconnect and reconnect the phone from the cable.
1517 The selected COM port is invalid. Please try selecting a different COM port from the Tools -> Options menu.
1518 The model type does not match.
1519 A sensitive field mismatch. Please try exiting CompanionPro and restarting. If the problem persists, contact technical support.
1520 The read process has been aborted.
1521 There was an error while writing to the file. Please make sure there is sufficient disk space and that the destination drive is not write protected or read-only media (Such as a CD-ROM).
1522 An error occurred while reading the file. The file may be corrupt.
1523 No Codeplug has been loaded.
1524 Call list entries have been skipped.
1525 The selected codeplug version is not supported.
1526 There is a codeplug version mismatch.
1527 A bad codeplug checksum has been detected. The codeplug may be corrupt.
1528 Access to the codeplug has failed.
1529 This phone model is not supported. Please consult the help documentation to view the list of supported models.
1530 An invalid port ID has been used. Please select a valid port ID.
1531 The serial connection is bad. Please check to make sure the cable is securely connected to the iDEN unit and plugged in to the COM port on the computer.
1532 Updated codeplug structure found.
1533 The codeplug default version has been updated to the latest verstion.
1534 The codeplug structure default version has been updated to the latest version.
1535 Unable to read phone. Please check to make sure the COM port setting is set correctly from the Tools -> Options menu. Also, be sure the cable is securely connected to the iDEN unit, and plugged into the COM port on the computer and that the battery is fully charged.\nFor USB Users, please disconnect and reconnect the phone from the cable.
1536 The has been an initialization error. Try exiting, then restarting CompanionPro.
1537 There has been an unknown internal error. Please try exiting CompanionPro and restarting.
1538 The selected port is busy. It may be in use by another application. Please free up the port, then re-try the operation.
1539 The selected baud rate is invalid.
1540 Urban value is out of range.
1541 Fleet number is out of range.
1542 Member number is out of range.
1543 Fleet ID is specified but no urban ID is specified.
1544 The member ID is invalid.
1546 The fleet ID is invalid.
1547 The operation was completed successfully.
1548 The operation has failed due to an unknown circumstance. Try exiting, then restarting CompanionPro.
1549 Unable to retrieve the codeplug version of the phone.
1550 Unable to get the codeplug defaults version for the phone.
1551 Unable to retrieve the serial number of the phone.
1552 Unable to retrieve the model type of the phone.
1553 Unable to get the person's name stored in the unit.
1554 Unable to retrieve the root comment.
1555 Unable to retrieve private ID's for NAM1
1556 Unable to retrieve private ID's for NAM2
1557 Unable to retrieve private ID's for NAM3
1558 Unable to retrieve phone list for NAM 1.
1559 Unable to retrieve phone list for NAM 2.
1560 Unable to retrieve phone list for NAM 3.
1561 Unable to retrieve the active line indicator.
1562 Unable to retrieve the baud rate setting.
1563 Unable to retrieve the talkgroup type.
1564 Unable to retrieve theemergency ID.
1565 Unable to retrieve the ring style.
1566 Unable to retrieve the power up mode.
1567 Unable to retrieve the power down timer.
1568 Unable to retrieve the last modification date.
1569 Unable to retrieve the model information
1570 Unable to retrieve the baud rate setting.
1571 There is no more room in your call list. You may remove unneeded entries in your list in order to free up more room.
1572 Unable to write the codeplug to the phone. Please check to make sure the cable is securely connected to the phone and plugged in to the COM port on the computer.\nFor USB Users, please disconnect and reconnect the phone from the cable.
1573 Unable to set the cross fleet NAM 1 private ID.
1574 Unable to set the cross fleet NAM 2 private ID.
1575 Unable to set the cross fleet NAM 3 private ID.
1576 Unable to set the private ID setting.
1577 Unable to retrieve the cross fleet NAM 1 private ID.
1578 Unable to retrieve the cross fleet NAM 2 private ID.
1579 Unable to retrieve the cross fleet NAM 3 private ID.
1580 Unable to retrieve the private ID
1581 This speed dial entry already exists.
1582 The speed dial index should be between 1 - 100.
1583 The IMEI/SIM ID is invalid or empty -- unable to display properties.
1584 The IMEI/SIM ID already exists in the file.
1585 Are you sure you want to delete this entry?
1586 Please enter the service provider's name.
1587 Please enter the phone number associated with the selected city.
1588 The phone you are trying to write to does not exist in the current COP file. No data was written to the phone.
1589 The source and destination serial numbers do not match. Please reselect phones which have matching serial numbers.
1590 The source and destination model types do not match. Please reselect phones with the same model type.
1591 Unable to retrieve model specific information from the phone. The codeplug may be corrupt, or mismatched.\n
1592 Unable to set the root comment. No comment was set.
1593 Unable to set the Phone Number for NAM 1.
1594 Unable to set the Phone Number for NAM 2.
1595 Unable to set the Phone Number for NAM 3.
1596 Unable to set the Active Line Indicator.
1597 Unable to set the baud rate of the phone.
1598 Unable to set the talkgroup type.
1599 Unable to set the emergency ID of the phone.
1600 Unable to set the power up mode.
1601 Unable to set the power down timer to the specified value.
1602 Please select the user you wish to remove from the users list.
1603 The file you have selected is not a valid CompanionPro file, or may have been corrupted. Please select a valid COP file to open.
1604 The phone that was just read already exists in the current COP file. Would you like to replace the existing phone information? If you click NO, then phone information just read will be discarded.
1605 This file already exists. Overwrite the existing file?
1606 Would you like to close the file?
1607 Characters are invalid.
1608 IP Control
1609 Cross Fleet
1610 Talkgroup Name
1611 Talkgroup ID
1612 Please select user(s) to add from the Available Users List. Click on a user, then click on the ADD button to add the user to the selected Talkgroup.
1613 Please select Talkgroup to add
1614 ComboBox with ModelTypes
1615 This phone does not support the status message list feature.
1616 This phone does not support the talkgroup scan feature.
1617 Load Message
1618 Save Message
1619 Modem
1620 Message Settings
1621 Help
1622 Phone List
1623 Private List
1624 Phone Settings
1625 Talkgroup Scan
1626 Status Message
1627 View
1628 Notes
1629 Save changes to %1?
1630 No message was entered, nothing has been saved.
1631 The carier.ini file is corrupted. Please reinstall CompanionPro.
1632 Please select a unit to write the details to.
1633 In order to view the details of a unit, you must first select a saved unit. To save a unit after entering its information, click on the next empty row.
1634 Please enter all valid fields.
1635 This phone model is not supported by the carrier.
1636 Unable to retrieve the codeplug version.
1637 Please enter a valid private ID.
1638 The phone information has been copied successfully.
1639 Please enter or select a city.
1640 This file does not exist, unable to open the file.
1641 Cannot initialize TAPI. The 'Send SMS' function will be disabled. If you would like to have this feature enabled, please contact Microsoft to upgrade TAPI on your machine to 3.10 or later.
1642 Unknown call list found. Details cannot be launched.
1643 Not able to get the ergo fields information from model table.
1644 The ergo fields table is corrupted or invalid. Please contact technical support.
1645 Please enter a value between %1 and %2
1646 Please select a record to move.
1647 Please select the model type.
1648 The phone data filled successfully.
1649 Cannot load message, no document is opened currently.
1650 Cannot save message, no document is opened currently.
1651 Control Max Value
1652 The phone list contains duplicate speed dial numbers. Please enter unique speed dial numbers.
1653 The specified file contains duplicate IMEI/SIM ID. Please enter uniqueIMEI/SIM ID.
1654 Please select one or more options to copy.
1655 Please be aware that this talkgroup must be enabled on the server. Contact your service provider.
1656 Talkgroup Mode : NAM2
1657 Talkgroup Mode : NAM3
1658 Status Message : NAM3
1659 Status Message : NAM2
1660 Status Message : NAM1
1661 Unable to reset the phone. Please check that the cable is securely connected to the phone and COM port.
1662 You don't have write permission to the current directory. Cannot run the application.
1663 The SMS message you entered is longer than the maximum SMS message length your service provider supports. The message will be truncated. You can send the entire message by selecting the "Auto Split" option from Tools -> Options -> SMS Message Settings. Do you want to continue and truncate the message?
1664 You did not specify a phone number to send the SMS message to. Please enter the Phone Number(s) in the "To:" field above.
1665 You are about to change your service provider information. Please contact your service provider for details on what information should be entered.
1666 The SMS send operation has been aborted.
1667 Control Minimum value
1668 The city has been added to the list.
1669 The city's information has been updated.
1670 The city has been deleted from the list.
1671 Please enter a value between 1 to 255.
1672 Please enter a value between 1 to 5000.
1673 The city you entered already exists, please select a unique city name, or choose "Update City" to change this city's information.
1674 The phone number you entered already exists. Please enter a unique phone number, or click "Update City" to change this city's phone number.
1675 Please finish entering the current unit information before trying to read a phone. To save the unit's information move the cursor out of the current row.
1676 Please finish entering the current unit information before trying to append a file. To save the unit's information move the cursor out of the current row.
1677 Please finish entering the current unit information before trying to append units. To save the unit's information move the cursor out of the current row.
1678 IP Address Control
1679 Please enter a valid IP address%1.
1680 Units
1681 Talkgroups
1682 There is no unit to add
1683 Please select one or more units to add.
1684 There is no unit to delete
1685 The current user information will not be saved because the private ID is invalid.
1686 The current talkgroup information will not be saved because the talkgroup ID is invalid.
1687 The current unit information will not be saved becuase the IMEI/SIM ID is invalid.
1688 The current unit information will not be saved because the serial number is invalid.
1689 The current unit information will not be save because the user name is invalid.
1690 The current unit information will not be saved because the model type is invalid.
1691 The current unit information will not be saved becuase the private ID is invalid.
1692 The current unit information will not be saved because the IP address is invalid.
1693 The current unit information will not be saved because the phone number is invalid.
1694 Talkgroup List
1695 Talkgroup Call List : NAM1
1696 Talkgroup Call List : NAM2
1697 Talkgroup Call List : NAM3
1698 Would you like to replace the last message saved with this one? If you click no, the message entered will be saved as a new message.
1699 This user is already a member of the selected talkgroup.
1700 Please enter a valid talkgroup name.
1701 A talkgroup with this name and ID already exists.
1702 Please enter a valid talkgroup name.
1703 iDEN
1704 CompanionPro
1705 The unit with the IMEI/SIM ID : %1 doesn't support the talkgroup scan list feature.
1706 The unit with the IMEI/SIM ID : %1 doesn't support the SMS message list feature.
1707 NAM1
1708 NAM2
1709 NAM3
1710 The SIM card on your phone was not found. Please make sure the your SIM card is properly installed on your phone and retry the operation.
1711 Your SIM Card has been blocked. Please contact your service provider to get your SIM card reset.
1712 Unable to continue without a valid PIN . Please enter the correct PIN to continue.
1713 Invalid PIN for this SIM card. Please make sure you have the correct PIN. You have a total of 3 attempts to enter a valid PIN, after which the SIM will become blocked.
1714 Unable to retrieve the call list from the SIM card. Please make sure the SIM card is properly inserted in the phone.
1715 You cannot copy more than one cell.
1716 Status Message
1717 Status ID
1718 Talkgroup Scan Mode
1719 Inside Unit
1720 SMS Actions
1721 Last Active mode
1722 Talkgroup mode
1723 Private call mode
1724 Phone Mode
1725 Net Mode
1726 Local Area
1727 Wide Area
1728 Targeted
1729 Last Active
1730 Private Call Line
1731 Phone Line
1732 Talkgroup Line
1733 Unit information
1734 This talkgroup could not be added because the selected user's talkgroup list is full. Please remove one or more talkgroups from the user's talkgroup list and retry the operation.
1735 The talkgroup you have selected has not been added. Please finish adding the talkgroup by selecting the next empty row in the talkgroups table. Then, you may add users.
1736 Number / ID
1737 Name
1738 Type
1739 Name Index
1740 Phonebook
1741 Please select the number type.
1742 Phonebook
1743 Datebook
1744 Please enter at least one number in order to save the phonebook entry
1745 Please enter a name in order to save the phonebook entry
1746 There are no entries in the list box.
1747 There are no names beginning with %1 or %2.
1748 Do you want to save the changes you made to the earlier record.
1749 New Phonebook Entry
1750 Delete Phonebook Entry
1751 TrueSync
1752 Enable
1753 Day View
1754 Week View
1755 Month View
1756 Unable to add new phonebook record.
1757 Unable to move the phonebook record.
1758 Unable to delete the phonebook record.
1759 Error while getting the alloted space.
1760 Phonebook Actions
1761 Datebook Actions
1762 Add Datebook Entry
1763 Delete Datebook Entry
1764 SIM ID
1765 Phonebook
1766 This phone does not support the phonebook feature.
1767 Speed Dial
1768 Message
1769 Date
1770 Size
1771 Model Number
1772 The simple phone list is full. The rest of phonebook main/home/work/mobile/fax/pager type entries will not be copied into the destination phone.
1773 The simple private list is full. The rest of phonebook private type entries will not be copied into the destination phone.
1774 '+' can only be the first character in the phone number.
1775 Phone number cannot have more than one '+' character.
1776 Please enter a valid alias.
1777 Please enter a valid number.
1778 Please select the number type.
1779 WRITE SIM Error Message ID %1.
1780 Your simple call list and phonebook has been synchronized successfully.
1781 Phonebook is full.
1782 Phone List is full.
1783 Private List is full.
1784 Please select an entry from private list.
1785 Please select an entry from phone list.
1786 Please select an entry from phone book.
1787 The PIM file does not exist. A new PIM file will be created.
1788 Please select a talkgroup to delete.
1789 Please enter a Name in order to save the phone book record.
1790 Please enter the subject.
1791 Start time cannot be later than end time.
1792 Please enter a valid alarm value between 1 - 10080.
1793 Start date cannot be later than end date.
1794 End date cannot be 13 months later than start date.
1795 Please select the day(s) to repeat the event.
1796 Please select a valid date to repeat the event.
1797 Please select the date of the month to repeat the event.
1798 Please select the correct month and date to repleat the event yearly by date.
1799 The selected COP file can not be opened because it is an older version.\n
1800 The selected file can not be opened because it is an older version. Would you like to convert it to the new version?
1801 The selected file is invalid or corrupted and can not be opened.
1802 You entered the incorrect SIM pin. Please try again.
1803 Name
1804 Cannot reset the phone.
1805 The SIM PIN you entered is incorrect. The current operation cannot be continued.
1806 The simple talkgroup list is full. The rest of phonebook talkgroup type entries will not be copied into the destination phone.
1807 Cannot read SIM card.
1808 Cannot write SIM card.
1809 This phone does not support the phone list feature.
1810 This phone does not support the private list feature.
1811 This phone does not support the talkgroup feature.
1812 TrueSync is not installed. Please install and try again.
1813 The sensitive fields mismatch
1814 The string containing user-user information is too long
1815 Unknown TAPI line error
1816 SIM Info
1817 The file you have selected is not a valid CompanionPro file, or may have been corrupted. Please select a valid PIM file to open.
1818 Because TrueSync is not installed, CompanionPro will not be able to synchronize the phonebook and datebook data with the phone.
1819 "+" can only be the first character in the phone number.
1821 Phone number size cannot be more than %1 characters.
1822 Invalid Talkgroup ID. Talkgroup ID cannot be blank.
1823 Invalid talkgroup ID. Valid range is 1-255.
1824 Invalid IP address. IP Address cannot be blank.
1825 Invalid IP address. An IP address must be entered in DDD.DDD.DDD.DDD format.
1826 Invalid character in the IP address. Valid range is 0-9 and ".".
1827 This phone does not support the SIM information.
1828 Please enter a name and at least one number in order to save the Phonebook record
1829 Please enter a name in order to commit any changes to the Phonebook record.
1830 Please enter at least one number in order to save the Phonebook record
1831 Phone Book record has not been saved
1832 Please enter the fields and click the 'Save' button.
1833 Phone Book record has not been saved.
1834 Invalid IP Address. IP Address cannot have a null value.
1835 Do you want to save the record ?
1836 Please select a databook entry to delete.
1837 There has been an unknown internal error. Please try reinstalling CompanionPro.
1838 Please finish entering the current unit information before trying to delete unit or select undo menu item. To save the unit's information move the cursor out of the current row.
1839 There are no Phonebook entries to delete.
1840 Please select a valid start time.
1841 Please select a valid end time.
1842 Please select a phonebook entry to delete.
1843 Please save current changes by clicking Save button or by selecting a different phonebook entry, then start New Phonebook operation.
1844 The SIM in your phone has invalid phonebook data. Please contact your service provider.
1845 The language will change the next time you start CompanionPro.
1846 A phone number can't consist of only a '+' character. Please enter a valid number.
1847 Invalid character in the phone number. Valid range is 0-9,*,#,P and +.
1848 Start date must be no more than one month before today's date.
1849 Start date must no more than one year after today's date.
1850 Please finish entering the current unit information before trying to write a phone. To save the unit's information move the cursor out of the current row.
1851 The private ID is invalid. Please reenter it.
1852 The phone has been copied successfully.\n\nNote: CompanionPro does not copy voice tags. Voice tags should be rerecorded.
1853 CompanionPro is writing the data to the phone with IMEI/SIM ID :%1
1854 Please enter a valid crossfleet private id.
1855 Private ID List:
1856 English
1857 Spanish
1858 Hebrew
1859 Chinese
1860 French
1861 Portuguese
1862 Japanese
1863 German
1864 Italian
1865 Automatic
1866 You are running an unsupported version of Windows . Currently USB is only supported for Windows 98 SE and Windows 2000. If you would like to use USB, please install one of the supported versions of Windows, and make sure you have a USB port on your computer, and the iDEN USB driver is properly installed.
1867 The application was unable to locate any USB ports on the computer. If you would like to use USB, please make sure you have a USB port on your computer, and the iDEN USB driver is properly installed.
1868 There is no iDEN USB driver installed. Please refer to your iDEN USB driver installation instructions .
1869 Phone Number field
1870 Korean
1871 The selected COP file can not be opened because it is an newer version.
1883 Non-English characters have been detected in your call list. Please select a language other than English for the "Call List Language" in the list of units for the phone you are writing to or remove any non-English characters from your call list.
1884 Talkgroup
1885 Main
1886 Private
1887 Home
1888 Work
1889 Mobile
1890 Fax
1891 Pager
1892 Talkgroup
1893 IP
1894 Other
1895 One or more member id's greater than 65,535 have been detected. These entries will not be copied to non-cross fleet phones.
1896 When using the ' Recover ' function on phones that have J2ME (JAVA) applications, downloadable Ringer (MIDI) tones, Voice notes, or Datebook, they will be removed. J2ME applications can be redownloaded via iDENUpdate free of charge. Additionally, Voice notes, Datebook and Ringer (MIDI) tones will be removed and are not recoverable. Do you want to continue?
1897 Headset Only
1898 Headset & Speaker
1899 Ring 1
1900 Ring 2
1901 Ring 3
1902 Ring 4
1903 Ring 5
1904 Ring 6
1905 Ring 7
1906 Ring 8
1907 Ring 9
1908 Ring
1909 Vibrate
1910 Vibrate/Ring
1911 Silent
1912 Default Style
1913 Off
1914 5 Seconds
1915 10 Seconds
1916 20 Seconds
1917 30 Seconds
1918 Continuous
1919 Zoom
1920 Standard
1921 Compressed
1922 All
1923 All Phonebook
1924 Some Phonebook
1925 Voice Messages
1926 Text Messages
1927 1 Ring
1928 2 Rings
1929 3 Rings
1930 4 Rings
1931 Style Name
1932 Ringer Volume
1933 Keypad Volume
1934 Mail Volume
1935 Java/Data Volume
1936 Headset
1937 Vibe All
1938 Line 1 Style
1939 Line 1 Type
1940 Line 2 Style
1941 Line 2 Type
1942 Pvt/Grp Type
1943 Call Alert Ring Style
1944 Call Alert Type
1945 Text Msgs
1946 Reminders
1947 Voice Mail
1948 Net Mail
1949 Backlight
1950 Display
1951 Call Filter Phone
1952 Call Filter Prvt/Grp
1953 Call Filter Alerts
1954 Call Filter Notifications
1955 Auto Answer Line 1
1956 Auto Answer Line 2
1957 Field Name
1958 Field Value
1959 Shortcut 1
1960 Shortcut 2
1961 Shortcut 3
1962 Shortcut 4
1963 Shortcut 5
1964 Shortcut 6
1965 Shortcut 7
1966 Shortcut 8
1967 Shortcut 9
1968 Shortcut 10
1969 Shortcut 11
1970 Shortcut 12
1971 Shortcut 13
1972 Shortcut 14
1973 Shortcut 15
1974 Shortcut 16
1975 Shortcut 17
1976 Shortcut 18
1977 Shortcut 19
1978 Shortcut 20
1979 Shortcuts
1980 New Phonebook Entry
1981 New Datebook Entry
1982 Phonebook
1983 Datebook
1984 Call Alert Queue
1985 Messages
1986 Recent Calls
1987 Voice Notes
1988 Browser
1989 Call Forward
1990 Settings
1991 My Info
1992 Memo
1993 Java Apps
1994 Ring/Vibe
1995 Call Timers
1996 Phone Setup
1997 In Call Setup
1998 Security
1999 Personalize
2000 Initial Setup
2002 Voice Volume
2003 Talkgroup Settings
2005 Styles
2008 Unused
2010 Styles Off
2011 Style
2012 Shortcuts
2016 Reorder Menu
2017 Left Key
2018 Right Key
2019 Power Up App
2020 Call Alert
2021 Reorder Menu
2022 Default Ready
2023 Phonebook
2024 Datebook
2025 Java Apps
2026 Messages
2027 Settings
2028 My Info
2029 Recent Calls
2030 Voice Record
2031 Memo
2032 Shortcuts
2033 Styles
2034 Call Timers
2035 Call Alert
2036 Call Forward
2037 SMS expire after
2038 GPS
2039 JavaApp
2041 Quick Note 1
2042 Quick Note 2
2043 Quick Note 3
2044 Quick Note 4
2045 Quick Note 5
2046 Quick Note 6
2047 Quick Note 7
2048 Quick Note 8
2049 Quick Note 9
2050 Quick Note 10
2051 SMS status report
2054 No serial ports were detected in your computer. Please install serial ports for serial communication.
52546 Unable to create a back up copy of existing file. If you continue existing data will be overwritten without creating a back up file on disk. Do you want to continue save?
52547 An unknown failure ocurred. Operation cancelled.
52548 The operation was canceled by the user
52549 The specified file exists but is inoperable. Please check if you have read/write access permission.
52550 The specified file exists but is not a valid Excel File.
52551 Failed to create Excel file
52552 Failed to create stream
52553 Failed to locate handler for read write operation
52554 Unable to access data to write
52555 Unable to write to the data stream
52556 Invalid grid object was passed in
52557 Invalid parameter object was passed in
52558 Invalid properties object was passed in
52559 Invalid stylesmap object was passed in
52560 Unable to read from stream
52561 Invalid data was passed in for the write operation
52562 Unspecified error ocurred when writing file
52563 Invalid data was accessed. Please check if required resources are available
52564 Unspecified error ocurred when reading file
52565 Fatal error. This was caused by program code. Please contact program vendor
52566 Unable to read file. Please check if this is a Excel 97 file. Earlier versions are not supported
52567 A new window cannot be opened on this data. This operation is unsupported
52568 RadioButton: Text Alignment
52569 Pushbutton face color
52570 RTL Reading Value
52571 Force DateTime input as number
52768 Standard
52769 Row Header
52770 Column Header
52771 Boolean Fields
52772 Numeric Fields
52773 Currency Fields
52774 Date Fields
52775 Text fields
52776 Binary Fields
52777 Memo Fields
52778 GUID Fields
52779 Deleted Rows Appearance
52780 Constraint Violation
52781 Chapter Fields
52792 Type of ellipses that will be drawn
52794 Dao bitmap user attribute
52797 Formatting color for negative numbers
52801 The ID for the external ole viewer
57344 CompanionPro
57345 For Help, press F1
57346 Select an object on which to get Help
57600 Create a new document\nNew
57601 Open an existing document\nOpen
57602 Close the active document\nClose
57603 Save the active document\nSave
57604 Save the active document with a new name\nSave As
57605 Change the printing options\nPage Setup
57606 Change the printer and printing options\nPrint Setup
57607 Print the active document\nPrint
57609 Display full pages\nPrint Preview
57616 Open this document
57617 Open this document
57618 Open this document
57619 Open this document
57620 Open this document
57621 Open this document
57622 Open this document
57623 Open this document
57624 Open this document
57625 Open this document
57626 Open this document
57627 Open this document
57628 Open this document
57629 Open this document
57630 Open this document
57631 Open this document
57632 Erase the selection\nErase
57633 Erase everything\nErase All
57634 Copy the selection and put it on the Clipboard\nCopy
57635 Cut the selection and put it on the Clipboard\nCut
57636 Find the specified text\nFind
57637 Insert clipboard contents\nPaste
57640 Repeat the last action\nRepeat
57641 Replace specific text with different text\nReplace
57642 Select the entire document\nSelect All
57643 Undo the last action\nUndo
57644 Redo the previously undone action\nRedo
57648 Open another window for the active document\nNew Window
57649 Arrange icons at the bottom of the window\nArrange Icons
57650 Arrange windows so they overlap\nCascade Windows
57651 Arrange windows as non-overlapping tiles\nTile Windows
57652 Arrange windows as non-overlapping tiles\nTile Windows
57653 Split the active window into panes\nSplit
57664 Display program information, version number and copyright\nAbout
57665 Quit the application; prompts to save documents\nExit
57666 Opens Help\nHelp Topics
57667 List Help topics\nHelp Topics
57668 Display instructions about how to use help\nHelp
57669 Display help for clicked on buttons, menus and windows\nHelp
57670 Display help for current task or command\nHelp
57680 Switch to the next window pane\nNext Pane
57681 Switch back to the previous window pane\nPrevious Pane
59136 EXT
59137 CAP
59138 NUM
59139 SCRL
59140 OVR
59141 REC
59392 Show or hide the toolbar\nToggle ToolBar
59393 Show or hide the status bar\nToggle StatusBar
61184 Change the window size
61185 Change the window position
61186 Reduce the window to an icon
61187 Enlarge the window to full size
61188 Switch to the next document window
61189 Switch to the previous document window
61190 Close the active window and prompts to save the documents
